Plastic splashbacks for the bathroom and shower room, by Dieter

Description by Dieter

We used the custom acrylic sheets to make splashbacks for our bathroom and our shower room. This applies both around the bath and the washbasin furniture.

How I made this project

We looked for custom splashbacks and ended up with TOSIZE.fi. Since we had doubts about the color and quality, we first ordered a sample. After comparing the color and testing the material, we placed the order (measured of course) and chose the delivery date. We made the round tap holes with a bell drill. The rectangular holes for the sockets/light switches with a jigsaw. We first tested this on the 10x10 sample. We glued the splashbacks to the wall with Tec7 and then sealed them with white sanitary kit. In the photos you can see the finished result of the splashbacks at the bath and the two washbasin furniture.

Dimensions of my DIY project

• 180.0 × 35 .0 cm
• 140.0 × 30.0 cm
• 169.0 × 35.0 cm
• 75.0 × 35.0 cm
• li>