Self-made display cabinet, by Danny

Description of Danny

Display cabinet. 1. I started by measuring sizes of course. 2. Based on that, I drew them out synchronously on a sketch. 3. Looked for information about the thickness of wood that is needed, so that the wood does not bend easily. 4. Ordered sheet material from TOSIZE.fi, do not forget to give the sheet material a label. Then it only remains to put the pieces in the right place. The construction: 5. Strong frame made of thick beams. 6. All the wood with labels mounted in the right place. Checked in between to see if everything was level. Hide all the wires of the lighting. 7. Seal the outside and inside in advance. 8. Apply primer. I chose white, but it is actually easier to use dark primer. • first degrease the wood, then sand it and wipe it off again so that it is free of dust. 9. Paint the final color, mount the doors. 10. Measure the space where the glass panel had to rest. Ordered on a random glass site.

How I made this project

Measuring is knowing, Spirit level. Good tools to finish everything neatly. Look carefully at the description and read through it. All dimensions can be adjusted to any space. My tip is to use 22 mm MDF for the outside. This allows you to mill hinges and you do not have to use very short screws. Preparation is everything. If you think about everything in advance, you will encounter fewer setbacks during the DIY project. Do not economize on materials, you will encounter yourself.

Dimensions of my DIY project

150 wide 219 high